Electricity meter is a device that measures the electricity used in your home. It shows the reading in units (kWh) which forms the basis of the monthly bill.
When you use a fan, AC, lights or any electronic device, the meter counts their power consumption. This data is sent to the electricity company which issues the bill.
Most homes have digital or analog meters installed. Their basic work is the same – tracking usage.
Your meter number, current reading, and past usage record is also on this meter. By understanding all these things, you can easily verify your bill.
If you ever have any doubt about the electric bill or gas bill, then the meter reading can be manually checked and confirmed.
List of all Pakistan electricity companies, Click on the name of your provider to see your bill:
· LESCO – Lahore Electric Supply Company
· MEPCO – Multan Electric Power Company
If you are thinking "How can I check my electricity meter reading?" then the answer to this is simple. You can check the usage by looking at the numbers on the screen or dial of your meter.
If it is a digital meter, then it has an LED screen where the current units blink. Analog meters have black/white dials which are read from left to right.
The best time to take readings is at the beginning or end of the month so that you can compare how much electricity was used.
You can take a photo of the reading on your mobile and keep a record. This method is helpful when you have to complain about the bill it may be an electric bill, sngpl gas bill or ssgc gas bill.
After checking at home, you can also match this data by going to pakbills.com.
Also learn about Difference Between LESCO, MEPCO, FESCO and GEPCO
The numbers shown on the meter show your total electricity consumption – these are units which are measured in kilowatt-hours (kWh).
One kilowatt-hour means that if a 1 kW appliance runs for 1 hour, it consumes 1 unit. These are the units displayed on the meter.
If you are seeing decimals on the screen, then the numbers before the decimal are the actual reading used for billing.
Some meters also have other information such as voltage, load, or day/night reading – ignore them and focus only on the units.
Noting these numbers makes you a smart consumer which helps in understanding the cost of electricity.
Get more information about: How to Calculate Your Electricity Bill Based on Units in Pakistan – 2025 Guide
Analog meter is an old model which has a rotating dial. In this, the reading has to be seen with a little attention. Each dial shows one digit, one has to read from left to right.
Digital meter is a new model which has a clear screen and shows real-time units. It is easy to read and accurate.
Digital meters have auto reporting – you do not need the company to send the reading. In analog meters, the meter reader comes and takes the reading himself.
Digital meters also have prepaid and smart features which can be tracked from the app.
The purpose of both is the same – just the method of reading is different. Both readings can be verified from pakbills.com.
At Pakbills.com you can duplicate the sui gas bill and electric bill without login.
Take a look of: Duplicate Sui Gas Bill Online – Download SNGPL/SSGC
You must be thinking “How many units of electricity am I using?” – The answer lies in your meter reading.
If your previous reading is 23400 and current reading is 23700, then you consumed 300 units. Simple subtraction gives the usage.
There are slab rates in the bill – first one rate for 100 units, then a higher rate is applied. These rates are set by WAPDA and the electricity provider.
It is important to understand this calculation so that you know the reason for the high bill.
On Pakbills.com, you can estimate the monthly bill amount by entering units.
Also get more information about: Utility Bill Monitoring & Saving Energy in Pakistan (2025 Guide)
And , Check MEPCO Bill in Multan now
You thought “Can I check my bill myself before it arrives?” – Absolutely! Meter reading helps you calculate your estimated bill.
You have to note the current reading and subtract the previous month’s reading. Multiply the units that will arrive with the rates.
If there is a difference between the meter reading and the bill, you can instantly file a complaint with the company.
Making a daily or weekly record of meter readings is helpful when there is an issue of overbilling.
Use pakbills.com or pakbills.info tools for verification where you get an accurate bill estimate based on units.
Learn about: How to Set Monthly Electricity Goals Based on Family Size
And Check LESCO bill in Lahore now
Many people write wrong digits while reading the meter – especially in analog meters. Dials have to be observed carefully.
Sometimes decimals or extra digits are included which are not counted in the actual bill.
Digital meters may show temporary errors when power is off, avoid reading during that time.
Taking meter reading at night may be difficult – hence always check in proper light.
To avoid mistakes, take a photo of the meter or read it in the reading Note this down.
Vista to learn more about: SSGC Online Bill Check 2025 and if you are from Islamabad then check IESCO online bill now!
Nowadays there are many electricity companies and third-party tools available that make meter reading easy. These apps have the option to record the reading.
Some apps automatically detect the reading by scanning a photo. These apps give accurate results and also show comparisons.
You can use the billing estimator tools of pakbills.com to calculate your bill by entering your units.
Apps help in tracking usage patterns and help you in monthly budgeting.
For people who use prepaid meters, recharge and usage record apps are also handy.
If you are from Peshawar, then check your PESCO bill online now!
If you are thinking “Why is my electricity bill so high?”, then first understand the actual usage from the meter reading.
Start noting your meter every 3-4 days, and identify which appliance consumes more units.
Control the usage of high consumption devices like iron, AC, water motor.
The meter record shows you the real picture and helps to stop unnecessary usage.
You can analyze your energy habits by using the usage tracker feature of Pakbills.com.
Check our latest update about: Understanding Your Electricity Bill: Charges and Consumption
If you feel the reading is abnormal – like a sudden spike or meter malfunction, file a complaint immediately.
If you are looking for an answer to “How to report wrong meter reading?”, call the official electricity provider’s helpline.
A complaint becomes stronger when accompanied by meter reading photo or video proof.
Too much delay can lead to double billing – so it is important to take early action on reading errors.
It is helpful to check the estimated bill on pakbills.com before reporting.
Understanding and tracking your electricity meter reading is not just smart, it is also important! Accurate readings help you control your bill, also you can estimate your bill by bill calculator.
Visit pakbills.com today and calculate your estimated bill easily.
You can easily check your electricity meter at home. Note the numbers displayed on the meter (usually kWh units) from left to right. In a digital meter these numbers blink clearly on the screen, whereas an analog meter has rotating dials. Writing down the reading at the start of each month or week gives you an idea of ??your usage.
The numbers displayed on the electricity meter show the units of electricity you have consumed, which is measured in kilowatt-hours (kWh). These numbers tell you how much electricity you have used. By subtracting these numbers you can find out the total usage for the current month.
Normal household electricity usage depends on family size and appliances. A 2-bedroom flat can have an average of 200–350 units per month. If AC, heater or electric geyser is used heavily, the units can go above 500. Regular meter reading helps you understand your trend.
Yes, if you feel that the meter reading is wrong or the bill is higher than expected, you can complain to WAPDA or your electricity provider. Filing a complaint by taking a photo of the meter or a screenshot of the reading is more effective. You can also verify the estimated units on pakbills.com before filing a complaint.
Subtract last month's reading from your current meter reading. The difference obtained is your unit consumption. Estimated bill can be calculated by multiplying it according to WAPDA rate slabs. To make this calculation easy, a free bill calculator is available on pakbills.com.
To check your electricity bill online in Pakistan, you can visit the website for your electricity provider and enter your 14-digit reference number. You can find your reference number on any previous bill.
You can check your Sui Gas bill online by visiting the Sui Northern Gas Pipelines Limited (SNGPL) website or the Sui Southern Gas Company (SSGC) website, and entering your 10-digit consumer number.
© 2025 PakBills. All rights reserved.
